6cd3b5bd10
update flowgraphs
2021-07-17 09:51:07 +02:00
e2a59771ed
tx flowgraph add hackrf sink
2021-02-03 20:56:21 +01:00
d63adab8f1
wifi_tx: disable receive chain
2020-05-31 17:14:09 +02:00
763d55d9f2
new GRC port naming scheme broke flow graphs
2019-07-02 10:09:17 +02:00
30be96a165
udpate flowgraphs
...
sorry, new GRC layout is horrible
2019-06-06 12:03:57 +02:00
8bffcf7faf
update flow graphs (broken)
2018-10-04 14:10:06 +02:00
429647eff1
loopback: gui hints
2017-01-08 13:56:46 +01:00
4a1bd44033
rx flow graph: delete unused encoding parameter
2016-09-29 13:14:27 +02:00
f7365d081a
phy hier: make mac in optional
2016-09-21 12:02:51 +02:00
3523807c09
phy hier: make mac out port optional
2016-09-21 10:12:36 +02:00
285a0e2558
switch to QT GUI
2016-09-15 11:37:27 +02:00
fff13b2443
flow graphs: use normalized gain
2016-08-31 08:47:52 +02:00
baa5b07152
link parameters also in transceiver
2016-08-08 20:50:31 +02:00
ba50c10a02
bugfix: link between EQ parameters and simulation parameters
...
The EQ parameters (bw, freq) should be updated from simulation
parameters, instead of using constants (10e6, 5.8G).
Signed-off-by: Jonathan Brucker <jonathan.brucke@gmail.com >
2016-08-08 15:35:33 +00:00
d16559b105
update flow graphs
2016-06-22 13:00:27 +02:00
cc0a56e341
Merge branch 'master' into development
...
# Conflicts:
# examples/wifi_loopback.grc
# examples/wifi_transceiver.grc
# examples/wifi_tx.grc
# grc/ieee802_11_decode_mac.xml
# grc/ieee802_11_mac.xml
# grc/ieee802_11_mapper.xml
# grc/ieee802_11_ofdm_decode_signal.xml
# grc/ieee802_11_ofdm_equalize_symbols.xml
# grc/ieee802_11_parse_mac.xml
# grc/ieee802_11_sync_long.xml
# grc/ieee802_11_sync_short.xml
2016-06-22 12:58:11 +02:00
5ddba507e5
update flow graphs
2016-06-22 12:52:48 +02:00
c3291917c8
update flow graphs
2016-05-31 15:40:18 +02:00
f9aa4b5ec2
remove wifi prefix, update flow graphs
...
# Conflicts:
# examples/wifi_loopback.grc
# examples/wifi_phy_hier.grc
# examples/wifi_rx.grc
# examples/wifi_transceiver.grc
# examples/wifi_tx.grc
2016-04-20 07:46:49 +02:00
760fc86101
rename
2016-04-20 07:45:49 +02:00
0f56254df3
- Added new Viterbi convolutional decoder to the OFDM Decode Mac block replacing the former IT++ version. This new decoder uses
...
SSE2 and improves the performance significantly. The decoder was taken from the gr-dvbt module from GNU Radio.
- Disabled some logging functions in the ofdm_mac and ofdm_decode_signal blocks that were degrading the performance significantly.
[Gonzalo Arcos | Rodrigo Ferreri]
2016-04-20 06:53:49 +02:00
3703abbbf1
flow graph: fix channels
2016-04-12 09:35:28 +02:00
17abd32ca9
flow graphs: move blocks around
2015-12-08 14:14:33 -08:00
9d593483bf
flow graphs: lo_offset by default
2015-12-08 12:53:59 -08:00
4a43c572b3
wifi_tx: remove antenna parameter
2015-12-08 12:52:58 -08:00
b781cea7eb
sim: change directory structure
2015-11-30 07:06:24 -08:00
7eae9a9bf9
Create workspace area; make no-gui version of wifi_loopback
2015-11-30 07:01:03 -08:00
12f2b0e913
flow graphs: set sensitivity to 0.56
2015-11-30 06:59:22 -08:00
d1d6ed6010
PHY: add sensitivity parameter
2015-11-30 06:55:12 -08:00
b3442dad46
loopback flow graph: set minimum interval for message generation
2015-04-24 10:27:12 +02:00
b093ab533a
flow graphs: delete unused parameters, fix sample rate of scope, add padding
2015-04-23 16:25:18 +02:00
c4baf4cff2
tx flow graph: fix lo offset
2015-04-23 16:23:46 +02:00
5575385e06
rx flow graph add 5MHz option
2015-04-22 15:33:01 +02:00
7fa4397590
update basic tx radio
2015-04-17 13:47:12 +02:00
910322c880
transceiver now has to connect directly to phy layer
2015-04-17 12:28:22 +02:00
607eb81c9f
update flow graphs
2015-04-17 10:24:45 +02:00
f4f8c7533d
update flow graphs (fix lo offset)
2015-04-14 17:05:57 +02:00
a8cae8a689
loopback: use channel model block
2015-04-14 13:19:57 +02:00
8b63004420
adding FER display to loopback radio
2015-04-14 09:25:37 +02:00
0d99a05f5a
loopback: less padding
2015-04-11 09:54:16 +02:00
297a0d8bc3
phy: pipe more samples into the flow graph
2015-04-11 09:54:16 +02:00
cb4dc5e3fa
adding slider to flowgraph to increase PDU size dynamically
2015-04-11 09:54:16 +02:00
dbfb65e5ab
make the output buffer size of the tx chain a variable of the block
...
- the default buffer size is set to 96k
- this allows to transmit large frames of up to 1500B using bpsk 1/2
2015-04-11 09:54:15 +02:00
7805bae220
loopback flow graph: fix SNR label
2014-10-09 13:13:51 +02:00
55d9dff3e0
grc: do not use csma/agc uhd blocks
2014-07-18 10:40:43 +02:00
bb88daf41f
grc: add blocks with mac address
2014-07-18 09:47:26 +02:00
32b05a6a31
grc: rx add notebook and output of autocorrelator
2014-07-18 08:56:12 +02:00
18bb283562
grc: rx average over all samples of autocorrelation
2014-07-18 08:48:44 +02:00
7bbaadbeb2
grc: delete duplicate flow graph
...
and rename rx_demo to wifi_rx
2014-07-18 08:12:09 +02:00
437cfc3bad
packet_pad: pad only at end of packet to reset digital filter
2014-05-08 13:13:47 +02:00
Bastian Bloessl